Stainless Steel Prover 20L Tank Metal Gauge Calibration Measuring Bucket Cans

Product Description

Product Description

Materials: SS304
Volume: 1,2,3,5,10,20,50L
Provers are the necessity in the gas station for metering the liquid. it is composed of:
Bleed lines are required (instead of bleed valves) on all new provers where air may be entrapped in the dry break coupler and lines going to it.
The level condition of volumetric field standards must be determined by using levels to plumb the neck rather than depending on the top of the neck to be level. The levels on volumetric field standards will be adjusted to agree with this level condition.
Values in the four tables have been updated and the minor scale division (subdivision) is defined as the neck uniformity tolerance.

Detailed Photos

Size Declaration:
Nominal volumes in each system are ideally selected in multiples of 1, 2, and 5 (liters or gallons) to facilitate calibration. However, a prover may be built to any size to meet specific needs. Non-standard size volumetric field standards that comply with all other requirements shall be considered to be in full compliance with this standard.
The temperature at which test measures and provers are referenced during calibration and during use for testing petroleum products is generally 15.56 °C (60 °F). International standards reference petroleum products to 15 °C. Provers may be used for applications other than petroleum products or in areas where a different reference temperature is used for petroleum products. In such cases, the appropriate reference temperature for the application should be identified and used. For example, the reference temperature for provers used in testing milk is 4.44 °C (40 °F).
 
Neck diameter of prover may vary; the critical factors to be considered which affect neck diameter is the volume above and below nominal, the graduation sizes, the minimum space between graduations and the use of fill pipes and vapor recovery systems.
* "Total neck volume" is defined as the volume contained in the neck between the bottom-most
scale graduation and the top-most scale graduation." If increased readability of range or
increased sensitivity is desired, the length of the reading scale on the prover may be adjusted with proportional adjustment of neck diameter, provided vehicle/mounted height constraints are not exceeded.

 

Product Parameters

Principle	The method of metering fuel is measured as of the density of water at a constant volume of 20ºC
Type	stent type or as same as united states stent type
Features	Check gas station flow meter standards
Size	100L-5000L
Material	SS201/304/316
Accuracy	0.05%,0.001%,0.0002%
Ruler types	Scale,vernier caliper
Ruler scale	100ml-2000ml
Package	Iron outer frame+carton

Main product

 

Our Advantages

 

Inventory advantages

1.Massive spot reserves

Tens of thousands of pieces of inventory of various categories are available, covering mainstream models and customized needs, reducing customer waiting cycles.
Support fast delivery, priority response to urgent orders, and help customers seize market opportunities.

2.Intelligent inventory management

The advanced system is used to monitor inventory dynamics in real time, and the data is accurate and visualized to avoid the risk of out-of-stock or backlog.
The safety stock threshold is dynamically adjusted to ensure stable supply in peak season and cost optimization in off-season.

3.Strict quality control guarantee

The inventory products have passed the ISO 9001 quality inspection process, regular sampling and batch traceability, and the quality is worry-free.
Standardized storage environment (constant temperature/dustproof/partition) to ensure the stable performance of raw materials and finished products.

 

Modern management
1.Digital management, accurate and efficient
Adopt advanced systems to track production progress in real time, optimize scheduling, and reduce downtime.

From order to delivery, supply chain, production, and warehousing data are integrated to improve collaborative efficiency.

Predict market demand through historical data, dynamically adjust production capacity, and reduce inventory risk.

2.Automation and intelligent production

Automated production line to reduce human error and improve consistency.

Equipment interconnection, real-time monitoring of operation status, preventive maintenance, and ensuring production stability.
 

3.Lean and standardized operation

Standardize on-site management, optimize the working environment, and improve efficiency and safety.

Continuously optimize processes, reduce waste, and shorten lead times.

Strict compliance with international standards (e.g. ISO 9001, IATF 16949) ensures consistent quality.

4.Green manufacturing and sustainable development
Adopt high-efficiency equipment and photovoltaic energy storage systems to reduce carbon emissions.

Waste recycling and regeneration to achieve efficient use of resources.

Track the environmental impact of products throughout their life cycle to help customers achieve their goals.

Packaging & Shipping

Packaging detailed:1.Carton packing
                                  2. wooden packing
                                  3. as customer 's requirement
Delievey Detailed: 20-35days after receiving deposit,or depends on the order quantity

 

Certifications

 

 

Company Profile

 

JiaSheng Petroleum Tech Co., Ltd. located in Xuzhou, Jiangsu province, Our company is a specialized manufacturer integrating design ,production and sale into an organic whole. Our company produces and sales various tanker parts, oilcan parts, watering cart parts, aluminium and stainless steel quick coupling, double-way and treble-way valves, medium and low pressure petrochemical valves, European standard gas recovery tanker parts, gas station recovery products. Our products are widely supplied for industries like petroleum company, troops, oil stocks, tank truck, watering cart and gas station.
Our company has engineering experiences for years, we are also specialized in the installment of gas station wire frame, oil tank, asphalt tank, wine storage tank, pipeline and gas station construction, once and twice gas station recovery redevelopment, European standard tank truck refit. Our company provides well-equipped products, advanced technique, strong technical force, and we can undertake the manufacture of other special parts 

FAQ

Q1: Are you a factory?
A:We are one of the leading China factory professional manufacture of fuel tanker parts, tank truck parts,fuel nozzle, fuel dispenser and fuel station parts.fuel pipe ect.Which covers10,000me and with independent D&R ability, and we can offer OEM and ODM service.
Q2: What are the application fields of your products?
A: mainly products including fuel tanker parts, tank truck parts,fuel dispenser and fuel station parts etc.
Q3: What is your terms of packing?
A: We pack our goods in standard export carton box, other packing type can do as required.
Q4: How about your delivery time?
A: 5-7 days for samples; 20-35 days for batch goods after received payment.
Q5: Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
Q6: What about the shipping package?
A: Package will use standard export carton, can do pallets as customized.
Q7: What is your sample policy?
A: We can supply the sample, but the customers have to pay the sample and freight.
Q8: How do you make our business long-term and good relationship?
A: We keep good quality and competitive price to ensure our customers benefit . We respect every customer and we sincerely do business with everyone.